User manual

FOLDING BIKE
11
HOW TO UnFOld
The following steps need to be taken in order to unfold the Bigfish folding bike properly. It can be done in any sequence.
Stand on the left hand side of the bike on a level and flat surface.
TIP: Before starting to unfold the Bigfish folding bike, position the pedals horizontal to the ground, with the left pedal to the front.
HandleBars
A: Press the button on the handlebar and move it to unfolded position. Repeat the procedure for the other handlebar. B: The button MUST jump
out to its original position (green mark visible). C: Avoiding the cables, fasten the handlebars together with the handlebar bracket.
Safe to ride: Ensure the green mark on both buttons is visible. Ensure the handlebar bracket is fastened securely.
If no green safety mark on the buttons is visible, try again so that the buttons jump out to their original position and the green safety mark on the buttons is
visible. If the problem persists do NOT ride the bike. If the handlebar bracket is broken or damaged in any way do NOT ride the bike. Take
your bike to your local dealer to have it serviced or contact us at info@bigfishbike.com.
green mark visible on
both buttons
a
B
C
1
2
2
1