Product Instructions

Ｅｌｅｃｔｒｉｃａｌ ｓｅｔｔｉｎｇｓ
When your CP2500 is set to normal mode and no load is connected
(or the output power is less than or equal to 5W), the CP2500 will
automatically shut down after 6 hours.
Ｎｏｒｍａｌ ｍｏｄｅ
●
●
●
●
Ｕｓｅ ＤＣ， ＵＳＢ－Ａ， ＵＳＢ－Ｃ ｏｕｔｐｕｔ
【Notice】
●
【Notice】
●
●
●
●
This product AC supports constant power mode. It can support products
whose power is greater than 2500W and less than 3500W, and whose input
voltage is suitable for wide voltage operation. When using this type of
appliance, please select the constant power mode. The output load
Ｕｓｅ ＤＣ ｏｕｔｐｕｔ
power of CP2500 will be limited to 2500W.
If your CP2500 is connected to the mains grid (AC input), the smart
inverter circuit will give priority to the grid (inverter bypass) for
power supply. At this time, the total power of your load cannot be
greater than 2500W. If it exceeds 2500W, the bypass overload function
will be activated and the AC output will be stopped.
If the AC output is short-circuited, it will trigger the product to
start short-circuit protection and turn off the AC output.
Communication regular mode. The AC standby time is 6H, mainly for your
very low power equipment (less than 5W). When the AC socket is not in
use, please click the AC control button to turn off the AC output to
save energy.
●
１． Ｔｕｒｎ ｏｎ ｔｈｅ ｐｏｗｅｒ ｓｗｉｔｃｈ （ｐｒｅｓｓ ａｎｄ ｈｏｌｄ ｆｏｒ ３ ｓｅｃｏｎｄｓ）， ｔｈｅ ｓｃｒｅｅｎ
ｗｉｌｌ ｌｉｇｈｔ ｕｐ． Ｃｌｉｃｋ ｔｈｅ ＤＣ ｉｃｏｎ ｏｎ ｔｈｅ ｓｃｒｅｅｎ ｔｏ ｔｕｒｎ ｏｎ ｔｈｅ ＤＣ， ＵＳＢ－Ａ，
ＵＳＢ－Ｃ ｏｕｔｐｕｔ．
２． ＵＳＢ－Ａ ｆａｓｔ ｃｈａｒｇｉｎｇ ｏｕｔｐｕｔ： ｓｕｐｐｏｒｔ ５Ｖ？３Ａ， ９Ｖ？２Ａ， １２Ｖ？１．５Ａ ｍａｘｉｍｕｍ １８Ｗ
ｃｈａｒｇｉｎｇ， ｓｍａｒｔ ｄｅｖｉｃｅｓ ｔｈａｔ ｓｕｐｐｏｒｔ ＱｕｉｃｋＣｈａｒｇｅ ３．０， ｕｓｅｄ ｆｏｒ ｓｍａｒｔ ＵＳＢ
ｄｅｖｉｃｅｓ ｓｕｃｈ ａｓ ｍｏｂｉｌｅ ｐｈｏｎｅｓ ｏｒ ｔａｂｌｅｔｓ ｔｈａｔ ａｌｓｏ ｓｕｐｐｏｒｔ ＱｕｉｃｋＣｈａｒｇｅ ３．０
ｔｅｃｈｎｏｌｏｇｙ ｆｏｒ ｆａｓｔ ｃｈａｒｇｉｎｇ Ｂａｔｔｅｒｙ ｌｉｆｅ． Ｔｈｅ ｔｗｏ ｐｏｒｔｓ ａｒｅ ｉｎｄｅｐｅｎｄｅｎｔ
ａｎｄ ｃａｎ ｓｕｐｐｏｒｔ ｕｐ ｔｏ ３６Ｗ ｆａｓｔ ｃｈａｒｇｉｎｇ ｆｏｒ ｔｗｏ ｄｅｖｉｃｅｓ ａｔ ｔｈｅ ｓａｍｅ ｔｉｍｅ．
３． ２xＰＤ４５Ｗ ＵＳＢ-Ｃ ｏｕｔｐｕｔ： Ｐｏｗｅｒ Ｄｅｌｉｖｅｒｙ ５Ｖ/３Ａ， ９Ｖ/３Ａ， １２Ｖ/３Ａ， １５Ｖ/３Ａ， ２０Ｖ/
２．２５Ａ （４５Ｗ Ｍａｘ） ｆａｓｔ ｃｈａｒｇｉｎｇ． Ｉｔ ｉｓ ｕｓｅｄ ｆｏｒ ｆａｓｔ ｃｈａｒｇｉｎｇ ａｎｄ ｂａｔｔｅｒｙ
ｌｉｆｅ ｏｆ ｓｍａｒｔ ｄｅｖｉｃｅｓ ｓｕｃｈ ａｓ ｍｏｂｉｌｅ ｐｈｏｎｅｓ ｏｒ ｌａｐｔｏｐｓ ｔｈａｔ ａｌｓｏ ｓｕｐｐｏｒｔ
ｔｈｅ ＰＤ ｆａｓｔ ｃｈａｒｇｉｎｇ ｐｒｏｔｏｃｏｌ．
Ｎｏｔｅ ｔｈａｔ ｗｈｅｎ ｕｓｉｎｇ ｔｈｅ ＵＳＢ－Ａ／ＵＳＢ－Ｃ ｏｕｔｐｕｔ， ｔｈｅ ＤＣ ｓｗｉｔｃｈ ｍｕｓｔ ｂｅ ｔｕｒｎｅｄ
ｏｎ ｆｉｒｓｔ． Ｉｆ ｙｏｕ ｄｏ ｎｏｔ ｕｓｅ ｔｈｅ ＤＣ ｏｕｔｐｕｔ， ｐｌｅａｓｅ ｔｕｒｎ ｉｔ ｏｆｆ ｉｎ ｔｉｍｅ ｔｏ
ｓａｖｅ ｅｎｅｒｇｙ．
●
The USB output is short-circuited or the power of the load device
exceeds the output power of the USB port of this product, it will
trigger the product to start short-circuit protection or over-
current protection and turn off the USB-A or USB-C output, (no
output after overload and short circuit), after removing the load
Automatically restores DC output.
ＤＣ５５２１＊２ ｏｕｔｐｕｔ： １２Ｖ／５Ａ， ｔｗｏ ｓｉｍｕｌｔａｎｅｏｕｓ ｏｕｔｐｕｔｓ Ｍａｘ： １２Ｖ／１０Ａ．
Cigarette lighter output DC12V/10A.
When 3xDC ports are output at the same time, they share 12V/10A.
Ｔｈｅ ｏｕｔｐｕｔ ｖｏｌｔａｇｅ ｏｆ ｔｈｅ ＤＣ５．５ｍｍ ｐｏｒｔ ｏｆ ｔｈｉｓ ｐｒｏｄｕｃｔ ａｎｄ ｔｈｅ
ｃａｒ ｃｈａｒｇｅｒ ｃｉｇａｒｅｔｔｅ ｌｉｇｈｔｅｒ ｉｓ １２．５Ｖ－１３．５Ｖ．
The DC5.5mm port of this product is a DC5.5*2.1 port. If you
want to use this port function, please confirm whether the port
of the electrical device is a DC5.5*2.1 port, and you can also
●
consult the device manufacturer for more information.
●
2xDC5.5mm ports output 5A. When a single DC output power device
exceeds 68W, the port will be over-current/overload protected
and the DC output will be turned off.
●
When the DC output is not in use, please turn off the DC switch
in time to save energy. You can short press the DC control
button to turn off the DC output.
Eco
●
ｍｏｄｅ
When your CP2500 is set to power saving mode, when the AC load is
less than or equal to 5W, it will automatically turn off the AC
output after 10 minutes.