Operation Manual

21
PORTUGUÊS ITALIANO ESPAÑOL NEDERLANDS DEUTSCH FRANÇAIS ENGLISH
can be seen in a menu option. To enter this option simply select the ‘Log’
option. Once you enter this option it will show you how many times you have
pressed a certain action button. The top number shows you the number of
presses for the current session, i.e. from when the controller was switch on.
This number will return to zero each time the controller is powered off. The
bottom number shows the total cumulative button presses from when you fi rst
switched the controller on. Note that this number may already have a button
press count from when it was tested in the factory. To check any button count,
simply press the action button and the totals will appear.
LED Function
The Action buttons, sticks and D-pad are all illuminated. This option can be
switched on and off in the menu to preserve battery life.
The lights can also be set to fl ash on and off when a vibration signal is sensed.
By default the option is set ON.
To change the LED function follow these steps:
01. Enter the toolbox as noted above and the select the LED icon.
02. To switch the illumination off, select the unlit light bulb icon on the left side.
03. To switch the illumination on, select the lit light bulb icon in the centre.
04. To make the LEDs fl ash with the vibration feature, select the vibrating
controller icon.