PS3™ QUICKFIRE CONTROLLER User’s Manual
Thank you for purchasing the Quickfire controller for PS3™ from Bigben Interactive. This product includes: • 5 Preset quick fire modes for all your favourite games. • Clear LCD screen. • 8 shots per second up to 48 shots per second. • Custom firing mode – set your own quick fire rate from 6 shots per second up to a blistering 60 shots per second. • Program any action buttons for rapid fire. • Tilt sensors and vibration. • Ergonomic, non slip triggers. • Supplied with 2 AA Alkaline batteries.
Custom quick fire mode The quick fire controller also includes a custom mode to ensure future compatibility with new games and so you can experiment with different firing rates. The rates can range for 6 shots to 60 shots per second. To set the custom firing rates follow these steps: 1. Press start and select simultaneously to enter the programming mode. 2. Press up or down on the D-pad to cycle through the different modes and choose M6. 3. Then press the select button to enter the shots mode. 4.
Troubleshooting. Controller is not working. • Ensure that the power button is the ‘On’ position. • Check that the batteries are not low. If so, replace the batteries. If power is low the Player LED will normally flash to indicate that the batteries need replacing. • Ensure that the receiver is connected to the console and press the home button on the controller to connect. • Check that the switch on the receiver is set to PS3™ mode.
Disposal of Old Electrical & Electronic Equipment This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it should be taken to an applicable collection point for the recycling of electrical and electronic equipment.
