User guide

14
1. Place the PX5 in PS3 mode by quickly pressing the power button twice.
2. In the PS3 Menu, select “Settings” > “Sound Settings” > “Audio Output Settings” >
Optical Digital > Dolby Digital 5.1
3. In the PS3 Menu, select “Settings” > “Accessory Settings” > “Audio Device
Settings” > set the “Input” and “Output” to “TURTLE BEACH PX5”
12/14 12:15 PM
0
Register to manage Bluetooth® devices such as
headsets, keyboards and mouse devices.
R
Re
Re
eg
eg
is
is
st
er
to
ste
ste
o
er to
er
o
to
m
mana
ma
an
a
a
age
n
a
n
ag
a
e
ge
g
e B
e B
e B
B
B
Bl
uet
o
Bl
u
Bl
ue
l
u
Bl
et
o
e
oot
h®
o
ooth
o
h
oth
h®
h®
®
®
®
®
®
®
® d
® d
®
d
dev
ic
dev
de
1. With the PX5 Bluetooth powered OFF, go in the PS3 Menu and
select “Settings” > “Accessory Settings” > “Manage Bluetooth
Devices”
2. If you have never used a Bluetooth device or have deleted any
profiles from other devices previously used with your console,
the PS3 prompt will ask if you wish to register a device. Choose
“Yes” to start scanning. If any other Bluetooth devices have
previously been paired with your console they will appear in a
list. Choose “Start Scanning” at the bottom of the screen.
3. On the PX5, press and hold the BT MFB button for 5 seconds
until the flashing LED changes from blue to red — then release
the button. A voice prompt in the earpiece will indicate that the
PX5 is in pairing mode.
4. When the PS3 is finished scanning, it will prompt you to select
the Bluetooth device. Select “TURTLE BEACH PX5” from the list.
5. Enter “0000” as the Pass Key and select “OK”. A voice prompt
in the earpiece will indicate that the PX5 is now paired with
your PS3.
When using the PX5 with a PS3, the Bluetooth is used for Playstation
®
Network chat. Follow these instructions to pair the Bluetooth.
PS3
™
Bluetooth
®
Chat Setup
Configure PS3 System Settings
Audio Device Settings
Microphone Level 3
Input Device TURTLE BEACH PX5
Output Device TURTLE BEACH PX5
Back
X Enter
OK