User`s manual

FITTING THE PHONE HOLDER

Your Gamephone is supplied with a removable phone holder to conveniently hold your phone

during play.

To attach or remove it from the controller, follow these steps.

01. Slide the holder into the slot in the top of the controller. When it

is fully inserted, it will click into place.

02. Slide the lock switch left on the rear of the controller to lock the

holder in place.

03. Loosen the knob on the rear to the holder so you can place your

phone in landscape or portrait orientation.

04. Tighten the knob and ﬁ t your phone into the sprung holder.

05. To remove the holder, ﬁ rstly remove your phone.

06. Push the lock switch right and then pull to the holder out of the

controller.

IMPORTANT

For the ﬁ rst set up, please ensure that you set the controller for your correct country and

keyboard set up.

For AZERTY (French) press buttons 2 and HOME together for 5 seconds for the ﬁ rst power

on.

For QWERTZ (German) press buttons 1 and HOME together for 5 seconds for the ﬁ rst

power on.

For QWERTY (UK, AUS & US) press buttons 4 and HOME together for 5 seconds for the

ﬁ rst power on.

USING THE CONTROLLER ON IPHONE, IPOD OR IPAD. IOS ICADE MODE.

MODE 1.

01. On your device, go to Settings \ General \ Bluetooth® and set Bluetooth® to ‘ON’