User`s manual

Once this is done, your controller is ready for use.

For all future connection set ups, simply follow these steps.

01. Set the mode switch on the Gamephone to position 2.

02. Switch the controller on by pressing and holding the ‘Home’ button for 5 seconds. LED

2 and power will light up to indicate that it is on and in the Android mode. The power

LED will ﬂ ash slowly.

03. Now press and hold the Home button again and quickly press and release the start

button. The power LED will now start to ﬂ ash rapidly to indicate that it is in search mode.

04. Select the ‘Gamephone driver’ on the apps page.

05. Choose the ‘Connect to’ option.

06. The controller will now connect and will be ready for play.

Check the Bigben Website for game suggestions that work in this mode.

Key swapping

If you are not happy with some of the button layouts used in either IOS or Android modes

you can simply swap button functions between 2 buttons.

01. While the controller is powered on and connected, press the select and start buttons and

release. The current mode LED will now ﬂ ash.