Datasheet

02
1.b. Features:
• Cable: 3m
• Two game modes: Cyberbike™ or Gamecube™
• Button programming system
• Handlebar calibration system
• Full Gamecube™ controls for compatibility with Gamecube™ and Wii ™
games.
• Two Z buttons
• Adjustable pedal resistance
• Forward and reverse pedalling
• Handlebar can be adjusted to three different heights
• Seat can be adjusted to seven different heights
• Front and rear stabilisers
• Maximum weight limit: 95kg/209lbs.
1.c. Cyberbike™ overview:
(Picture A)
2. ASSEMBLING THE CYBERBIKE™
The Cyberbike™ should only be assembled by an adult. When assembling the bike,
no force should be applied when inserting parts. In case of difculty, you should refer
to the assembly diagrams or contact the helpline (see paragraph 7).
2.a. Assembling the parts
Front and rear supports: Turn the Cyberbike™ upside down and attach the feet
as described below. Position the screws and tighten using the assembly key
provided.
Seat: Insert the tube supporting the seat into the Cyberbike™ main frame (see
diagram below).
Handlebar: Connect the cable inside the tubes before inserting the tube into
the Cyberbike™ base. Insert the handlebar tube into the Cyberbike™ main
frame (see diagram below).
Pedals: Each pedal is marked as left and right. It is essential that you insert the
correct pedal to each side. Tighten the pedals with the tool provided.
Cable with Gamecube™ connector: Connect the cable to the connector
located on the front of the Cyberbike™ (see diagram below). Ensure that the
connector is tted the right way round.
ENGLISH DEUTSCH ESPAÑOLFRANCAIS NEDERLANDS ITALIANO PORTUGUÊS