Installation guide
Isis
®
WWW.BIGASSFANS.COM ©2011 DELTA T CORP. DBA BIG ASS FAN CO. ALL RIGHTS RESERVED
32
3-way single fan application
CAUTION: The fan must operate on a dedicated circuit with a dedicated neutral. Failure to install the fan on a dedicated
circuit will cause the fan to operate improperly.
This method of control is referred to as a 3-way switch because either switch (controller) can be used to start or stop the fan or adjust fan speed. The
connection diagram above illustrates how the installer can utilize the existing 3-way wiring to add the additional control location.
Note: The controller provided with the fan (ATI06) does not include a neutral conductor; however, the optional part required for 3-way operation (ATR001-1L)
does include a neutral conductor. This is the only physical difference between the two controllers and can be used for identication if necessary.
Alternative Wiring Methods (cont.)
J-BOX
(mounted locally to fan)
Fan wire functions / colors:
AC Hot / Black
Neutral / White
Traveler / Red
BK
YL/RD
GND
FAN SPEED CONTROLLER
REMOTE
Fixture Module
WHT
BK
RD
YL/RD
GND
FAN SPEED
CONTROLLER
Companion Module
BLK
GRN
WHT
RED
100-125VAC 1Ф
10A 60Hz
GRN
BLK
RED
WHT
GRN
BLK
RED
BLK
GRN
RED