Installation guide

Isis

WARNING: To reduce the risk of electric shock, wiring should be performed by a qualied electrician! Incorrect assembly

can cause electric shock or damage the motor and the controller! Hazard of electrical shock!

WARNING: The installation of a Big Ass Fan must be in accordance with the requirements specied in this installation

manual and with any additional requirements set forth by the national electric code (NEC), ANSI/NFPA 70-1999, and all

local codes. Code compliance is ultimately YOUR responsibility! Failure to comply with these codes could result in

personal injury or property damage.

CAUTION: The Big Ass Fans product warranty will not cover damage or failure caused by improper installation.

WARNING: Exercise caution and common sense when powering the fan. Do not connect the fan to a damaged or

hazardous power source. Do not attempt to resolve electrical malfunctions or failures on your own. Contact Big Ass Fans

at 1-877-BIG-FANS if you have any questions regarding the electrical installation of this fan.

CAUTION: The fan must operate on a dedicated circuit with a dedicated neutral. Failure to install the fan on a dedicated

circuit will cause the fan to operate improperly.

Electrical Installation

Wall Controller with Wallplate

Power requirements

Fan diameter Input power

Required

circuit size

Full load

amps

8 ft (2.4 m) 110–125 VAC/60 Hz 10A 3.9

10 ft (3 m) 110–125 VAC/60 Hz 10A 3.9

12 ft (3.7 m) 110–125 VAC/60 Hz 10A 3.9