Instructions / Assembly

9
LOWERING THE JACK
1. Support the load with appropriate means before
removing transmission. Check to make sure the
transmission stable on the jack saddle and load
is xed in place before attempting to lift lower, or
transport.
2. Grasp the handle firmly with both hands.
Securely hold on to the jack handle so your
hands do not slip and ensure the release valve
does not rapidly lower.
3. Carefully open the Release Valve by slowly
turning the handle counterclockwise. (Do not
allow bystanders around the jack or under the
load when lowering the jack.
4. Lower saddle to the lowest minimum height
before attempting to transport load.
TRANSPORTING THE LOAD
1. Ensure the jack saddle is fully lowered and
load is secure before attempting to lift, lower, or
transport transmission.
2. Transport the load over level and solid ground,
preferably concrete, and ensure the oor is swept
clean before transporting load.
3. Be diligent in continually monitoring the load in
transit. Keep all other persons at a safe distance.
4. DO NOT use on asphalt, or any soft surface
as jack may sink or tip, causing damage to
transmission or personal or injury/harm may
result.
5. WARNING: If jack tips or leans STOP WHAT
YOUR ARE DOING. MOVE QUICKLY TO A
SAFE DISTANCE. DO NOT TRY TO HOLD OR
STEADY JACK to prevent personal injury and/or
property damage.
RE-INSTALLING A GEARBOX
1. Ensure the jack saddle is fully lowered and load
is secure before attempting to lift or transport
transmission.
2. Transport the load over level and solid ground,
preferably concrete, and ensure the oor is swept
clean before transporting load.
3. Be diligent in continually monitoring the load in
transit. Keep all other persons at a safe distance.
4. DO NOT use on asphalt, or any soft surface
as jack may sink or tip, causing damage to
transmission or personal or injury/harm may
result.
5. If jack tips or leans STOP WHAT YOUR
ARE DOING. MOVE QUICKLY TO A SAFE
DISTANCE. DO NOT TRY TO HOLD OR
STEADY JACK.
6. Raise load to desired height.
7. WARNING: Use caution when re-installing
transmission load can shift causing personal
injury and/or property damage