Instructions / Assembly

TO REPLACE JACK OIL

2. Open release valve by turning handle counter-

clockwise (4 full turns).

1. Position the jack on level ground and lower the

saddle in the upright position.

3. Lay the jack on its side and drain the uid into a

suitable container.

Note: Dispose of hydraulic uid in accordance with

local regulations.

4. Position the jack on level ground.

6. Replace bleeder screw.

7. Perform the Air Purge Procedure.

5. Fill the oil case until oil level is just beneath the

lower rim of the oil ll hole.

KEEP DIRT AND OTHER MATERIAL CLEAR

WHEN POURING.