User Manual

Passively Arming The Security System With The Optional Last Door
Arming Feature
Security System Armed and Activated
Disarming the Security System
Automatic Rearming
The Valet Switch And Valet Mode
Valet Mode
Remotely Lock/Unlock the door in valet mode
Security Valet Override - Disarming The Security System Without The
Transmitter
Exiting the Valet Mode
The Red LED Status Light
The LED Status Light is used as a visual indicator of what
state the security system is in at any given time. Additionally, it is also used as part of
the Zone Violation, and the Zone Testing features. The Red LED Status Light is
normally positioned in a location that is easily observed by the driver,
and there are 7 possible conditions reflected by the LED Status Light:
Security System Status
Zone Violation
Optional Pre-Warning Shock Detection Circuit
Anti Hi Jacking appearance
Ignition Anti Hijack
Driver Door Anti-Hijack
Remote Anti Hijack
Suspend the AHJ mode
Disable the AHJ mode
Programming Transmitters
Ignition safety door lock & unlock
2 Stage safety disarm
PROGRAMMABLE FUNCTION