Instruction manual
70
Ladderstand Install • FIGURE 5
Ladderstand Install • FIGURE 5a
r
atchet strap
Ladderstand Install
FIGURE 6
Ratchet FIGURE 1 Ratchet FIGURE 2 Ratchet FIGURE 3
Note: Some models require 2 ratchet straps.
ratchet strap
ratchet strap
VITAL RATCHET INSTRUCTIONS
STEP 1. Starting with ratchet in open position, insert strap through slot in the
center of the ratchet wheel. (see fig. 1) Before beginning to ratchet, remove slack
from strap by pulling loose end as tightly as possible. Then ratchet handle back
and forth to tighten strap.
STEP 2. After strap is tight, close handle to the lock position. (see fig. 2)
STEP 3. To remove tension, pull spring loaded retaining lock then open ratchet
completely and manually pull strap to loosen. (see fig. 3)
Spring Loaded
Retaining Lock
Strap goes up through
center slot in ratchet wheel
READ THIS MANUAL IN ITS ENTIRETY PRIOR TO USING THIS PRODUCT.