Instruction manual

READ THIS MANUAL IN ITS ENTIRETY PRIOR TO USING THIS PRODUCT.
This instruction manual complies with the Treestand Manufacturers Association’s TMS 04 - Standard Practice for Treestand Instructions and TMS 02 - Standard Test Method for Treestand Fall Arrest Systems.
ATTENTION!! WHEN YOU SEE A “ WARNING!” BE SURE TO HEED THE MESSAGE!
THE INFORMATION CONTAINED IN THESE MESSAGES CAN SAVE YOUR LIFE!!
9
C
C
)RRWUHVW
/HIW
0DLQIUDPH
5LJKW
0DLQIUDPH
7RS/DGGHU
6HFWLRQ
8QGHU
6XSSRUW
*XVVHW
8QGHU
6XSSRUW
*XVVHW
)URQW)RRW
3ODWIRUP
5HDU)RRW
3ODWIRUP
5LJKW6LGH
6HDW6XSSRUW
5HDU6XSSRUW
+RRS
5HDU)UDPH
6XSSRUW
/HIW6LGH
6HDW6XSSRUW
6HDW*XVVHWV
E
E
E
E
E
E
E
E
E
E
D
D
B
B
B
B
CC
C
C
E
E
E
E
D
D
D
D
E
E
STEP 7. Insert the seat bar through the front of the seat assembly
NOTE: The seat tension bolt must be threaded
completely into the seat bar for proper assembly (Fig. 2).
STEP 8. Assemble the shooting rail by attaching the left/right shooting rail pieces to the
main shooting rail pieceFig. 2).
STEP 9. Sleeve the backrest of the seat assembly over the side seat supports. Then, attach
the seat assembly and the shooting rail to the side seat supports
Fig. 2).
STEP 10. 
hole of each side seat supporttension bar to the side seat supports using
(2) 3/8’’ nylock nuts. Ease the tension bar into a straight position

nut (Fig. 2).
STEP 11. SECURELY TIGHTEN EVERY BOLT AND NUT. NOTE: It
is important to check that the side seat supports are ush to the
edge of the foot platformside seat
supports is tightened. This will ensure proper seat function.
STEP 12. 
on the seat assembly to tighten the seat fabric.
STEP 13. shooting rail stops
to set at desired height. Attach the shooting rail cover and
armrest covers.
          
 Field Installation-Ladderstands, for installation
instructions.
CR4301-S FIGURE 1
WARNING! Armrests are provided for comfort and should be used as
armrests only. The armrests are not designed to carry the full weight of
the user. Never place more than 15 pounds (7 kg) on the armrests. Failure
to follow these instructions may result in serious injury or death!
WARNING! The footrest is not meant to bear more
than 15 pounds (7 kg). This part is meant as a footrest
only, DO NOT use as a step when climbing into or out of
your ladderstand! Failure to follow these instructions
may result in serious injury or death!