Instruction manual
73
READ THIS MANUAL IN ITS ENTIRETY PRIOR TO USING THIS PRODUCT.
This Instruction Manual complies with the Treestand Manufacturers Association’s
TMS 04 - Standard Practice for Treestand Instructions & TMS 02 - Standard Test Method for Treestand Fall Arrest Systems
STEP 9. Attach the backrest to the armrests using (2) 5/16" x 2" hex bolts [C] and
(2) 5/16" nylock nuts. (fig. 4) NOTE: The connection tubing for the backrest is
shorter than the connection tubing for the shooting rail.
STEP 10. Assemble the shooting rail by inserting the shooting rail extensions
into the shooting rail and securing with (2) 1/4" x 1" hex bolts [A] and (2) 1/4" nylock
nuts. Next, attach the assembled shooting rail to the inside of the side rails using
(2) 5/16" x 2" hex bolts [C], (2) nylon washers and (2) 5/16" nylock nuts. (fig. 4)
STEP 11. SECURELY TIGHTEN EVERY NUT AND BOLT AT THIS TIME.
STEP 12. Attach the seat cushion and shooting rail cover. (fig. 4)
To activate your product’s warranty, a registration card can be found on page 103
and must be completed and returned to the manufacturer within 30 days of purchase.
Be sure to keep a copy of this for your records.
TOOLS REQUIRED FOR ASSEMBLY Adjustable Wrench Qty 2
Min. Tree Diameter • 9 Inches # Person(s) • TWO (2)
Max.Weight Capacity (user and equipment) • 500 lb/227 kg
CR4850-S
SPECIFICATIONS
Part # Description Qty
UP11-0320 S - Ladder Section 3
UP10-0630 Top Ladder Extension 2
UP10-0631 Mainframe 2
UP10-0632 Foot Platform 1
UP10-0633 Seat Platform 1
UP10-0634 Seat Support 2
UP10-0635 Under Support Gusset 2
UP10-0224 Support Bar Ladder Piece 1
UP10-0214 Support Bar Tree Piece 1
UP10-0638 Safety Sleeve 4
UP10-0639 Armrest 2
UP10-0640 Left Side Rail 1
UP10-0641 Right Side Rail 1
UP10-0642 Shooting Rail 1
UP10-0643 Shooting Rail Extension 2
UP10-0644 Back Rest 1
UP10-0645 Top Step 1
UP10-0646 Rear Frame Support 2
UP10-0464 Seat Cushion 1
Part # Description Qty
UP10-0465 Shooting Rail Cover 1
UP10-0027 Ratchet Strap 2
UP10-0183 Stabilizer Strap 2
UP10-0182 Rope 1
UP10-0660 Treestand Safety DVD 1
UP10-0008 Full Body Harness 2
UP12-0009 Owners Manual 1
Hardware Pack
1
UP77-0016 [A] 1/4" x 1" Hex Bolt 2
UP77-0039 [B] 5/16" x 1 3/4" Hex Bolt 5
UP77-0041 [C] 5/16 x 2" Hex Bolt 14
UP77-0044 [D] 5/16" x 2 1/4" Hex Bolt 18
UP77-0019 [E] 1/4" x 1 1/2" Hex Bolt 4
UP77-0001 1/4" Nylock Nut 6
UP77-0029 5/16" Nylock Nut 36
UP77-0032 5/16" Wing Nut 1
UP77-0002 1/4" Nylon Washer 2
UP77-0065 Snap Pin 4
UP77-0033 5/16" Cap Bolt 1
$/10*01
! /# 1$-&$-2$+#$('