Instruction manual

READ THIS MANUAL IN ITS ENTIRETY PRIOR TO USING THIS PRODUCT.
This instruction manual complies with the Treestand Manufacturers Association’s TMS 04 - Standard Practice for Treestand Instructions and TMS 02 - Standard Test Method for Treestand Fall Arrest Systems.
ATTENTION!! WHEN YOU SEE A “ WARNING!” BE SURE TO HEED THE MESSAGE!
THE INFORMATION CONTAINED IN THESE MESSAGES CAN SAVE YOUR LIFE!!
9
STEP 6:   left/right shooting rails to the armrests using (2)

assembly of the shooting rail by attaching the shooting rail main piece to
the upper sides of the left/right shooting rails

STEP 7. SECURELY TIGHTEN EVERY NUT AND BOLT AT THIS TIME.
STEP 8. Attach the shooting rail cover to the shooting rail, the seat cushion
will rest on the seat platform and attach to the tree.
            Field
Installation-Ladderstands, for installation instructions.
To activate your product’s warranty, a registration card can be found on page
15 and must be completed and returned to the manufacturer within 30 days of
purchase. Be sure to keep a copy of this for your records.
CR3811-S FIGURE 1
Side Frame
Side Frame
Platform
Support
Platform
Support
Top Ladder
Extension
Top Ladder
Extension
Snap Pins
Top Ladder
Section
B
B
Seat Platform
E
E
D
A
A
D
Side Frame
Side Frame
Foot Platform
Platform Support
Platform
Support
Top
Ladder
Extension
Top
Ladder
Extension
Footrest
Nylon
Washers
E
E
CR3811-S FIGURE 2
WARNING! The footrest is not meant
to bear more than 15 pounds (7 kg). This
part is meant as a footrest only, DO NOT
use as a step when climbing into or out of
your ladderstand! Failure to follow these
instructions may result in serious injury
or death!