Installation Guide

 34  [e-mail]
A:WithatleasttwohelperslifttheCrowsnestSideWallAssemblyandSwingSideWallAssemblysothe(040)Wall
CafeWindowPaneland(051)SLWindowSidePanelmeetandaretighttogetherasshowning.7.1and7.2.
B:Looselyattach(070)FrontGroundto(051)SLWindowSidePaneland(040)WallCafeWindowPanelwith4
(WB9)5/16x2-1/8”WaferBolts(withatwasherandt-nut)asshowning.7.1,7.2and7.3.
C:Looselyattach(071)FrontFloorto(040)WallCafeWindowPanelwith2(WB8)5/16x2-3/8”WaferBolts(with
atwasherandt-nut)asshowning.7.1,7.2and7.4.
D:Makesuretheassemblyissquarethenattach(060)SLPaneland(043)SWSidePanelto(071)FrontFloorwith
2(S4)#8x3”WoodScrewspersidethentightenbolts.(g.7.1,7.2and7.4)
Fig. 7.3
Fig. 7.2
Fig. 7.1
Fig. 7.4
040
040
060
043
070
Crowsnest
Side Wall
Assembly
Swing
Side Wall
Assembly
Step 7: Front Wall Assembly
Part 1
2 x 5/16 x 2-3/8” Wafer Bolt (5/16” at washer, 5/16” t-nut)
4 x 5/16 x 2-1/8” Wafer Bolt (5/16” at washer, 5/16” t-nut)
4 x #8 x 3” Wood Screw
Hardware
WB9
WB8
with5/16”
FlatWashers
with5/16”
FlatWashers
071
051
Inside View
043
060
051
WB8
WB9
S4
S4
1 x Front Ground FSC 5/4 x 4 x 64-1/4”
1 x Front Floor FSC 2 x 4 x 64-1/4”
Wood Parts
070
071
Outside View
S4
5/16”
T-Nut
5/16”T-Nut
070
071
Front