Product Manual

WWW.BIGASSFANS.COM © 2015 DELTA T LLC ALL RIGHTS RESERVED.
3
1. Quantities of the Pedestal Hardware vary depending on whether one or two pedestals will be attached.
2. The safety cable components are included only if you are mounting the fan with the Yoke Mount or Wall/Column Mount. For Yoke Mount installations, the safety cable will have
two looped ends. Gripples and wire rope clips are included with the Column Mount only. Shackles are included with the Yoke Mount only.
3. Guy wires are designed to constrain the fan’s lateral movement. Guy wire hardware is packed separately from the fan hardware. Big Ass Fans recommends using guy wires
if the fan’s extension tube is 4 ft or longer; therefore, guy wires are included in all fan packages with 4 ft or longer extension tubes. Big Ass Fans also recommends using guy
wires if the fan is exposed to high winds or similar conditions, or if the fan is close to any building fixtures. If you are installing the fan in any of these conditions and guy wires
were not included in your order, contact Customer Service.
4. Used only with fans that are mounted from a 4 ft or longer extension tube. These parts are packed separately from the other guy wire hardware.
Safety Cable (2) Gripple
®
(2) Wire Rope Clip Shackle
3/4” Eyenut Yoke Washer 3/4” Flat Washer 3/4-10 x 3” Hex Bolt
Pedestal
Hardware
1
Yoke Mount
Hardware
Wall/Column
Hardware
Yoke Washer
Assy Kit
Safety Cable
Hardware
2
(4) 1/2-13 x
2” Hex Head
Screw
(4) 3/8-16 x
1-1/4” Hex Head
Screw
(4) 1/2-13 x 4-1/2”
Hex Head Cap
Screw
(4) 3/8-16
Nylock Nut
(8) 1/2-13
Nylock Nut
(8) 3/8” Flat
Washer
(16) 1/2”
Flat
Washer
3/8” Flat Washer 3/8-16 Nylock Nut 3/8-16 x 1” Hex Bolt
(2) 3/4” Flat
Washer
3/4-10 Nut Yoke Attachment Bracket 3/4-10 x 3-1/2” Hex Bolt
(4) Guy Wire (4) Gripple
®
(8) Wire Rope Clip
(4) Guy Wire Clip
2
(2) 1/2-13 x 5’’ GR 8 Bolt
2
(4) 1/4” Beam Clamp
(4) 1/4-20 Hex Nut
Guy Wire
Hardware
3
(4) 1/4-20 x 1” Eyebolt
(4) Locking Carabiner