Product Manual

CONTENTS
Introduction
Safety Instructions ii
About this Fan 1
Pre-Installation
Parts and Hardware 2
Fan Diagram 4
Preparing the Work Site 5
Mounting Overview 6
Mounting Method:
Portable Base
1. Attach Wheels (to Portable Base) 7
2a. Attach Fan (to Portable Base) 8
2b. Attach Pedestal (to Portable Base) 9
3. Attach Second Pedestal (to Pedestal) 10
4. Attach Yoke (to Pedestal) 11
Mounting Structure:
Wall
1. Attach Supports (to Wall) 12
2. Secure Yoke (to Supports) 13
Mounting Structure:
Column
1. Prepare Angle Irons 14
2. Attach Supports (to Column) 15
3. Secure Yoke (to Supports) 17
4. Secure Safety Cable 17
Mounting Structure:
I-Beam
1. Attach Upper Yoke (to I-Beam) 18
2. Attach Extension Tube (to Upper Yoke) 19
3. Secure Safety Cable 19
4a. Attach Lower Yoke Brackets (to Extension Tube, 3 ft or Shorter) 20
4b. Attach Lower Yoke Brackets (to Extension Tube, 4 ft or Longer) 20
5. Attach Beam Clamp 21
6. Route Guy Wire Through Gripple® 21
7. Install Remaining Guy Wires 22
8. Attach Fan (to Lower Yoke) 22
Mounting Structure:
Bar Joists
1. Select Proper Angle Irons 23
2. Pre-drill Angle Irons 24
3. Fasten Angle Irons (if span is longer than 8 ft) 24
4a. Fasten Single Angle Irons to Roof Structure Mounting Points 25
4b. Fasten Double Angle Irons to Roof Structure Mounting Points 25
5. Attach Upper Yoke (to Angle Irons) 26
6. Attach Extension Tube (to Upper Yoke) 27
7. Secure Safety Cable 27
8a. Attach Lower Yoke Brackets (to Extension Tube, 3 ft or Shorter) 28
8b. Attach Lower Yoke Brackets (to Extension Tube, 4 ft or Longer) 28
9. Attach Beam Clamp 29
10. Route Guy Wire Through Gripple® 29
11. Install Remaining Guy Wires 30
12. Attach Fan (to Lower Yoke) 30
Mounting Structure:
Wood or Metal
Superstructure
1. Attach Chain or Cable 31
2. Secure Guy Wires 31