Product Manual

2. Attach extension tube (to upper yoke)

Fasten the extension tube to the upper yoke with the Extension

Tube Hardware. Before tightening the bolts, allow the extension

tube to hang freely and balance itself. Tighten the bolts to 40

ft·lb (54.2 N·m).

Extension Tube Hardware:

a. (2) 1/2-13 x 4-1/2” Bolt

b. (4) 1/2” Flat Washer

c. (2) 1/2-13 Nylock Nut

3. Secure safety cable

WARNING: The safety cable is a crucial part of the fan and must be installed correctly. If you have any

questions, please contact Big Ass Fans Customer Service.

ATTENTION

The safety cable is already attached to the extension tube.

Secure the safety cable by wrapping it around the I-beam and connecting the looped ends with the shackle. The

cable must be drawn tightly around the I-beam, leaving as little slack as possible. If possible, the shackle should

be on the topside of the I-beam. Securely tighten the shackle.

Shackle

I-Beam