Product Manual

MOUNTING METHOD: PORTABLE BASE

WARNING: To reduce the risk of ﬁre, electric shock, and injury to persons, the fan must be installed with

the supplied mounting hardware. Other mounting hardware cannot be substituted.

1. Attach wheels (to portable base)

To install the wheels, insert the screw through the center of the wheel. Thread the hex nut onto the screw

approximately 1”, and then insert the screw (attached to the wheel) into the hole on the fan base until it is tight.

Screw the hex nut against the base, but do not overtighten. Repeat on the other wheel. Test the wheels to ensure

they rotate freely.

Wheel Hardware:

a. (2) 1/2-13 x 3-1/2” Hex Head Cap Screw

b. (2) 1/2”-13 Hex Nut

If you are mounting the fan directly to the portable base, continue to step 2. If you are installing pedestal(s),

proceed to step 2b.