Manualshelf

Specification Sheet - Remote Control Information

ManualsBrandsBig Ass Fans ManualsCeiling FansL Series by Haiku Home 52 in. Indoor White Ceiling Fan with Integrated LED, Works with Alexa with Remote Control
12
© 2015 DELTA T CORP. ALL RIGHTS RESERVED. HAIKU
®
by Big Ass Fans
To set Timer mode, press the Timer button 1–7 times (once for each hour) to program the end
time. During adjustment, the fan mode indicators will flash, and then the Timer setting is displayed
on the speed indicator bar. To exit Timer mode, press the Clear button.
Whoosh Mode
Whoosh mode silently mimics natural breezes to make you feel up to 40% cooler.
To enable Whoosh mode, set the maximum fan speed using the Speed arrow buttons, and then
press the Whoosh button. The top Speed indicator will flash. To exit Whoosh mode, press the
Whoosh, Speed, or On/O button once.
Operating the Light
To turn the light on or o, press the Light On/O button on the remote. The Up Light button
increases brightness; the Down Light button decreases brightness. Press and hold the Up or Down
Light button to quickly increase or decrease the brightness until the desired level of illumination
is reached.
Understanding the Fan Mode Indicators
Each operating mode is indicated by a pattern on the fan mode indicator display, which is located
on the bottom of the fan and is visible from the floor. The display includes an LED (light emitting
diode) bar graph to indicate fan speed and Whoosh mode, and separate LEDs to indicate Timer
mode and Sleep mode.
All indicators automatically turn o approximately one minute after the last button is pressed to
minimize power consumption and prevent nuisance lighting at night. The indicators will display
the current speed setting by default.
Speed indicators
When the fan is running, the Speed indicator LEDs show the current fan speed (1—7). Whoosh
mode is indicated when the highest set speed indicator is flashing. When all indicators are
simultaneously flashing, Timer mode is active.
You can toggle the display from Speed mode to Timer mode by pressing the Timer button once.
To toggle from the Timer mode to Speed mode, simultaneously press the Speed button and
Whoosh button once. See the previous page for instructions on changing fan speed.
Sleep mode indicator
The Sleep LED indicates that Sleep mode is active. A flashing Sleep LED indicates that the Timer
mode is being adjusted. See the previous page for instructions on using Sleep mode.
Timer mode indicator
The Timer LED indicates that Timer mode is active. A flashing Timer LED indicates that the Timer
mode is being adjusted. See the previous page for instructions on using Timer mode.