Specification Sheet - Remote Control Information

© 2015 DELTA T CORP. ALL RIGHTS RESERVED. HAIKU
®
by Big Ass Fans
Powering the Fan
To turn the fan on or o, press the On/O button on the fan remote. This button can also be used
to reset the fan’s speed.
Changing Fan Speed
Fan speed is increased or decreased by pressing the Up or Down Speed button on the remote.
Seven fan speeds are available to accommodate your comfort level.
To change the fan speed, press a Speed button. To automatically step through the speeds, press
and hold a Speed button. The fan mode indicators will illuminate and a short beep will be heard
until speed 7 (high) or 0 (o) is reached.
Sleep Mode
Sleep mode reduces the fan speed by one increment every hour until the lowest speed is reached.
When the programmed time period ends, the fan automatically turns o. Sleep mode is only active
when Timer mode is used.
To enable Sleep mode, set the fan speed and Timer mode, and then press the Sleep button. The
Sleep indicator will illuminate. To exit Sleep mode, press the Sleep, Clear, or On/O button.
Timer Mode
In Timer mode, the fan runs at a set speed until the programmed time period ends. Note: Timer
mode is disabled if the fan speed is 0 (o).
Operating Your Haiku
®
Fan
The remote must be pointing toward the fan to function properly.
Power
Light
Power
Adjust
fan speed
Sleep
Timer
Clear
Whoosh
Adjust light
brightness