Instructions / Assembly

HAIKU® HOME ● WWW.HAIKUHOME.COM/SERVICE

Insert the steel pin (a) into the hole at the top of the extension tube, and then slide the mounting ball

upward, seating the steel pin in the inner slots of the ball.

Mounting Ball Hardware:

a. Steel pin

Insert the wedge (b) into the mounting ball as shown, and

then secure the wedge with the screw (c). Tighten the screw

enough to prevent movement between the mounting ball

and extension tube. Do not over-tighten the screw.

Mounting Ball Hardware:

b. Wedge

c. 4 mm self-tapping screw

STEP COMPLETED