Instructions / Assembly

STEP COMPLETED

HAIKU® HOME ● WWW.HAIKUHOME.COM/SERVICE

Place the lower cover ring (a) around the extension tube, resting it evenly on the motor. There should

be a very small gap between the cover and the airfoils. Rotate the cover ring clockwise until it stops.

Thread the wires through the opening in the lower cover trim (b), and then slide the trim down the

extension tube, resting it evenly on the cover ring.

Align the screw holes on the trim with the motor screw holes, and then secure the trim in place with

the provided screws (c).

Lower Cover Hardware:

c. (2) Painted M3.5 screws

BlackWhite