Instructions / Assembly

HAIKU® BY BIG ASS FANS

Insert the steel pin (a) into the hole at the top of the extension tube, and then slide the mounting ball

upward, seating the steel pin in the inner slots of the ball.

Mounting Ball Hardware:

a. Steel pin

Insert the wedge (b) into the mounting ball as shown,

and then secure the wedge with the screw (c). Tighten

the screw enough to prevent movement between the

mounting ball and extension tube. Do not over-tighten

the screw.

Mounting Ball Hardware:

b. Wedge

c. 4 mm self-tapping screw

STEP COMPLETED