Instructions / Assembly
9
HAIKU® BY BIG ASS FANS
Rest the motor assembly (a) on your lap. Moving clockwise, install each airfoil (b) with the provided
hardware. Tighten the screws to 2.5 N·m (22.1 in·lb). Do not use power tools to install the airfoils, and
do not over-tighten the screws! Over-tightening the screws may cause the airfoils to warp and void
your warranty.
Airfoil Hardware:
c. (6) M5 screws with tooth washer
Fans without lights: Position the motor cover (d) over the motor, and then place both hands flat on
the cover and turn it clockwise to lock it in place.
DO NOT USE POWER TOOLS!
STEP COMPLETED
2
1