Installation Guide

WWW.BIGASSFANS.COM © 2019 DELTA T LLC
4
DIRECT MOUNT
D1. While supporting the light module, use a 9/64 in. allen wrench to turn the
screws on both ends of the fixture counterclockwise until they completely back
out of the yellow end caps of the light module.
D2. Rotate the light module 90° and slide it downward. Pull the wiring harness out
of the yellow end cap of the light module and disconnect it.
D3. Loosen the two captive screws on the front of the fixture.
D4. Pull the driver access door outward and down to open it.