Component description 1.Cover plate 2. Installation template 3.Fixation part = fi = Connecting bolt (2} Adjustment sheet {2) Plastic TAB{2) Fixing plate Rubber bushing(2} 5. Water inlet hose 6.
Installation steps Installation tools Noel OB Cross screwdriver Monkey wrench Barrel and rag ‘Water pressure range: please follow the instructions. 2.Corner valves shall be located close to the location where this product is installed and disassembled. 3.Please use the braided hose that comes with the product to prevent water leakage. 4. When Installing braided hose,be careful to prevent the black gasket falling out. Installation Procedure 1.Loosen the nut connecting and removal 2.
Installation steps 6.Close the water valve; (@When the ceramic is similar to the figure above, we suggest connecting the straight end of the hose ta the cover || ef (©When the ceramic is similar to the figure above, we suggest connecting the elbow end of the hose to the cover European ceramic ~ 8.
Installation steps 9.0pen the angle valve to check for 10.Turn on the knob to check whether water leakage; the nozzle is protruding; Bb 11.
