Specifications

January 2013 Page 7 of 15
Safety and Electrical Connections
All electrical wiring and connections MUST be carried out by a competent qualified
electrician in accordance with the latest edition of the IEE wiring regulations and/or
local statutory regulations (see Wiring Diagram on Page 11).
A single phase isolator with a contact
separation of at least 3mm in all poles
must be fitted to the supply wiring.
The isolator must be fitted in an
accessible position.
The cassette heater must be earthed.
Ensure that the supply cables, circuit
breakers and other electrical
installation equipment are correctly
sized for the cassette heater being
installed; see Table 2. Connect single
phase supply to IEC C13 in-line
connector plug supplied and fit the
plug to the appropriate IEC socket.
Table 2
KLV1
(LPHW = 82/71°C
EAT = 18°C)
KLV1-CB
(LPHW = 60/40°C
EAT = 18°C)
Heat Output (kW)
150V = 7.1
120V = 5.8
100V = 5.0
150V = 5.6
120V = 4.5
100V = 3.8
Weight (kg)
36
36
Electrical Supply
(V/ph/Hz)
230/1/50
230/1/50
Maximum Power
Consumption (W)
354
354
Maximum Running
Current (A)
1.7
1.7
IEC In-line plug to be
fitted to this socket