Specifications

SWITCHware System Administration Manual48

This value sets where does ZAPTEL driver takes its timing from. Available options are:

6.1.2.1 Advanced Options

Advanced options section contains all fields which relate to zapata and zaptel configuration files:

Zapata

Configuration of your hardware interface(s)

Zaptel

Configuration to use your hardware interface(s)

6.1.2.1.1 Zapata

Zapata advanced fields control all value related to the analog or digital interfaces.

General options

All general options relating to all system trunk types

National Dialing Code:

This is national dial code needed to be dialled in order for system to be able to dial national destinations

using this trunk.

Example: "1" (USA, Canada), "0" (United Kingdom, Germany)

International Dialing Code:

This is the international dial code needed to be dialled in order for system to be able to dial international

destinations using this trunk. Example: "1" (USA, Canada), "00" (United Kingdom, France)

E164 Accepted:

If trunk supports accepting destinations in E164 format.

Prefix:

Value entered in this field will be included before the destination number dialed:

Example:

Prefix= "5"

Dialled destination"212 400 7921"

system will dial: 9 212 400 7921"

Language

Language used for this trunk

Context

All defined its own "context". This field is not modifiable.

Status

Trunk status in relation to system operation.

Default Destination

This field set where all incoming calls (where DID is not pre-set) will be sent to.

Signalling Type

Following signalling types are available.

* em: E & M

* em_w: E & M Wink