Specifications

Trunks 47

Deny:

Specify from which IP/Subnet should this trunk not be allowed from.

Permit:

Specify from which IP/Subnet should this trunk be allowed from.

6.1.2 PSTN

SWITCHware includes a powerful service providers templates in order to allow very easy method of adding

PSTN trunks. There are many providers and generic analog and digital interfaces pre-configured . As long the

interface is inserted in the server it takes few clicks to fully configure a PSTN trunk. Only a trunk name needs

to be entered. Of course, further customisation is possible by changing the values in pre-configured fields.

Required Fields

Name:

Enter trunk name.

Default Destination:

This field set where all incoming calls (where DID is not pre-set) will be sent to.

Pre-Configured Optional Fields

Channels:

Single channel or a range of channels being configured.

Group:

Every ZAPTEL trunk needs to be belong to a group. Selecting any group will enable this trunk. In addition

SWITCHware auto selects next available group and groups already used will not show in the select box.

Span Number

Span number being configured

Span Timing