Specifications

Settings 143
© 2003-2008 Bicom Systems
Context in the dial plan for outbound calls from this client
Disallow/Allow:
The "allow" and "disallow" allow you to fine tune the codec selection beyond the initial bandwidth
selection on a codec-by-codec basis.
17.3.4 H323
H323 is an ITU-T standard for transferring multimedia video conferencing data over packet-switched
networks, such as TCP/IP. There is a LAN standard for high-quality video, and an Internet standard for
lower-bandwidth video over lines as slow as 28.8Kbits
Port:
This sets the port that H323 will bind to. The default H323 port number is 1727. It is recommended that
this value not be altered in general.
Bind Address:
This allows you to bind H323 to a specific local IP address instead of binding to all addresses. This
could be used to enhance security.
Context:
Context in the dial plan for outbound calls from this client
DTMF Mode:
Dual Tone Multi-Frequency, the system used by touch-tone telephones. DTMF assigns a specific
frequency (consisting of two separate tones) to each key so that it can easily be identified by a
microprocessor.