Specifications
Settings 133
© 2003-2008 Bicom Systems
Codecs available:
·
ITU G.711 (64 Kbps, sample-based also known as alaw and ulaw)
·
ITU G.723.1 (5.3/6.3 Kbps, 30ms frame size)
·
ITU G.726 (16/24/32/40 Kbps)
·
ITU G.729 (8 Kbps, 10ms frame size)
·
GSM (13 Kbps (full rate), 20ms frame size)
·
iLBC (15Kbps,20ms frame size: 13.3 Kbps, 30ms frame size)
·
Speex (2.15 to 44.2 Kbps)
·
LPC10 (2.5 Kbps)
17.1.11 Monitoring
Monitoring sets alarms and notifications at which the system will monitor itself for normal operation and
where by appropriate
notifications are sent if alarms are triggered.
Monitor:
Self monitor time interval in minutes
Reload Type:
Select whether to reload the system at some specific time of a day or in regular time intervals (hourly).
Reload (hours):
If restart type is set to regular intervals restarts will happen every (provide value) of hours. Restart is
usually only necessary for debugging purposes.
Restart Type:
Select whether to restart the system at a specific time of a day or in regular time intervals (hourly).
Restart:
If restart type is set to regular intervals restarts will happen every (provide value) hours
Notification e-mail:
Email address where alarm message notifications will be sent to
IMPORTANT NOTE:
Reloading the system will not interrupt any services while restarting the system does stop and starts
all system services.