Installation guide

System Configuration 47
Configuring Access Numbers
Configure trunk information, internal modem extension, and voice port station numbers. The information on this page
specifies how users access the messaging system from internal and external phones.
To complete the access numbers information fields
1. In the Navigation Pane, click System > Configuration > Access Numbers.
For detailed field information, see the System > Configuration > Access Numbers table.
2. Type the Trunk pilot #. This is the number callers dial to reach the messaging system from an outside phone.
3. Type the # of trunks answered, the number of trunks the messaging system answers.
4. Specify the Internal modem extension number, the extension number used to access voice messages using an
internal phone.
5. Type the Voice port station numbers Pilot # the internal extension subscribers dial to access messages. This is
also called the master hunt group number.
6. Click Save.