Installation guide

Page Field Descriptions 460
System > Switch > Park and Page
Field Description
Park and page ID
The system ID for call paging. Use this ID for a one-key dialing rules for
individual subscribers.
Park code
The park sequence used by the phone system.
Pickup code
The pickup sequence used by the phone system.
Park pool
Select to have the system use only one port for cut-through paging.
Clear to use two ports for cut-through paging.
Internal paging code
The transfer sequence to transfer the call for internal paging.
External paging code
The transfer sequence to transfer the call for external paging.
Page type
There are three types of call park and paging:
Internal. After placing the caller on hold, the messaging system dials
the subscriber’s pager and sends the phone number. The system then
reports if the call was successful before closing the call.
External. The messaging system transfers the caller to the
subscriber’s paging service and ends the call.
User pager phone. After placing the caller on hold, the messaging
system dials the subscriber’s pager and sends the phone number. The
system then reports if the call was successful before closing the call.
Internal page zone
Internal paging lets extension users broadcast announcements to other
multiline terminal users, the announcement broadcasts to idle
extensions. An internal paging zone is a group of extensions. Up to
eight external paging zones can be defined.
External page zone
External paging zones are overhead speakers connected to the phone
system. The overhead speakers can be subdivided into separate zones
that enable overhead paging to specific locations in a business. For
example, a lunch room, separate floors, or buildings. Up to eight
external paging zones can be defined.
Use whisper to
announce paging
Select to enable the whisper paging feature if the phone system
supports the feature. With whisper paging, if the subscriber’s extension
is busy, the messaging system announces using a subscriber phone
that a call is parked on another extension.
Clear to disable whisper paging.
Use call progress for
parking
Select to enable call parking with call progress.
Use call progress for
paging
Select to enable paging with call progress.
Pickup delay
The maximum number of seconds that calls remain parked before the
messaging system takes the after-greeting action for a subscriber. The
maximum number is 300.
Repeat page… times
The number of times the system pages a subscriber before taking the
after-greeting action. The maximum number is five.
Wait between repeats…
seconds
The number of seconds the system waits between paging retries. The
maximum number is 300.