Installation guide

Page Field Descriptions 458
System > Switch > Message Waiting Indication
Field Description
Enable message waiting
indication
Select to enable message waiting indication systemwide.
When not selected, disables message indication.
NOTE
WHEN THIS FEATURE IS DISABLED THE FIELDS IN THE
MESSAGE WAITING INDICATOR CODES SECTION ARE
DISABLED. THE CONTENTS OF THE FIELDS ARE RETAINED, SO
THAT IF MESSAGE WAITING INDICATION IS REACTIVATED THE
SETTINGS RETURN. SELECT Reset all lamps, THEN CLICK
Save AFTER DISABLING THEN ENABLING THE MESSAGE
WAITING INDICATION.
Message Waiting Indicator codes
On (activation) code
Contains the codes to turn on message waiting indication.
The codes must include “X” which represents the extension
number.
Off (deactivation) code
Contains the codes to turn off message waiting indication.
The codes must include “X” which represents the extension
number.
Maximum number of
retries … times
The number of times the system resounds the Message Lamp
On or Off sequence to subscriber extensions. Retries might
be necessary when circumstances prevent the activation of a
message waiting indicator on the first attempt.
Wait … minutes
between retries
The number of minutes the messaging system waits between
retries.
Reset
Reset MWI daily at
The time for daily reset of message waiting indication. Each
day at the time specified, the system activates message
waiting indication for all subscribers with new messages.
Reset MWI after each
new message
The system immediately resets a subscriber’s message
waiting indicator after each new message.
Reset all lamps
The messaging system immediately resets all message
waiting indicators and reactivates message waiting indication
for all subscribers with new messages.