Installation guide

Page Field Descriptions 457
System > Switch > Dialout
CAUTION!
CONSULT WITH TECHNICAL SUPPORT OR A LICENSED PHONE TECHNICIAN BEFORE CHANGING ANY VALUES ON THIS PAGE.
Field Description
Dialout pause time definition
Comma (,) =…
milliseconds
The number of milliseconds the system pauses for a comma
(,) in a dialing sequence.
Semi-colon (;) =…
milliseconds
The number of milliseconds the system pauses a semi-colon
(;) in a dialing sequence.
Hookflash time definition
Ampersand (&) =…
milliseconds
The number of milliseconds the system pauses for an
ampersand (&) in a dialing sequence.
Percent (%) =…
milliseconds
The number of milliseconds the system pauses for hookflash
for a percent sign (%) in a dialing sequence.
Dialtone delay…
milliseconds
The number of milliseconds the system waits for a dial tone
before it places a call.
Dialout DTMF duration…
milliseconds
The number of milliseconds for the length of the touchtone.
For PLUSNET-1 sites, this value ranges from 8–50; for all
other sites, the range is 5–50.
DTMF interdigit delay…
milliseconds
The number of milliseconds the system waits between
touchtones when dialing.
For PLUSNET-1 sites, this value ranges from 8 to 50; for all
other sites, the range is 5–50. This range might need to be
changed if optional packages are installed.