Installation guide

Page Field Descriptions 454
System > Switch > Dialing Codes
Field Description
Outdial access code
The outdial access number that the messaging system dials
to call outside the system.
For example, if you type 9, (nine comma), the system dials
9 and pauses before dialing the external number. The system
automatically dials the outdial access number before dialing
any message delivery number that is greater than or equal
to the outdial trigger length.
Return call outdial
access code
The outdial access number that the messaging system dials
to call outside the system for a Return Call.
Call transfer sequences
Initiate sequence
The dialing code that puts a caller on hold before dialing the
extension to transfer the caller.
Connect sequence
The dialing code to complete the transfer when the called
party answers or to release the call to the destination
number.
Recall sequence
The dialing code to recall the caller from hold when the
internal extension is busy or does not answer.
Busy recall sequence
This sequence represents the dialing code to return to the
unidentified caller when the internal extension is busy. This
field is optional.
When this field is blank, the system uses the Recall
sequence when an internal extension is busy. When a
sequence is entered in this field, the system uses this dialing
code when an internal extension is busy and only uses the
Recall sequence when an internal extension does not
answer.