Installation guide

Page Field Descriptions 419
Network > Remote Sites
Field Description
System ID
The remote site system ID.
Remote site name
The remote site name.
Voice name
Recorded remote site name. If 00:00 appears on the button
label, a recording does not exist.
Network site type
The type of phone system used to exchange messages with
the remote site. Specified when the remote site is added to
the messaging system.
• Open. The site uses the public phone network to
exchange messages.
• Other carrier (Private). The site uses a private phone
network to exchange messages.
Remote Site Private ID
The private ID the system must dial to reach the remote site
using a private phone network.
NOTE
THIS FIELD ONLY APPEARS IF THE Other carrier
(Private) NETWORK SITE TYPE IS SELECTED WHEN THE
SITE IS CREATED.
Restrictions
Sets any restrictions to message delivery to or from the
remote site.
• Outgoing. Local site can only receive messages from
the remote site. The local site cannot place message
delivery calls to the remote site.
• Screen. Local site can only deliver messages to remote
site. The local site cannot receive message delivery calls
from the remote site.
Protocol
Displays the networking protocol for the remote site. If using
Plusnet:
• AMIS. Audio Messaging Interchange Specification is an
analog protocol used to facilitate communication between
messaging systems at remote sites. AMIS supports the
most common messaging system functions, including
sending, receiving and replaying messages.
• PLUSNET-1. An analog protocol used to facilitate
communication between messaging systems at different
sites. PLUSNET-1 provides advanced messaging features,
including urgent and private messages, unlimited number
of messages per call, unlimited message length and
unlimited number of recipients per message.
Outgoing and Incoming Calls
Last call
Displays the date of the last networking call to the site, the
number of messages sent and received, and the length of the
call.
Status
The length of the last network call in minutes and seconds.
Total failed calls
The number of failed calls. Calls that did not connect.
Messages sent
Number of messages sent.
Received
Number of messages received.
Total failed calls
The number of failed calls. Calls that did not connect.
Reset
Click to reset the failed calls counter.
Maximum failed calls
allowed
The maximum number of failed calls. The messaging system
stops sending and receiving messages to remote sites when
the number of failed calls reaches this value.
Message Delivery