Installation guide

UNIVERGE

UM8000 Message Networking 313

Determining Call Data for a Remote Site

Determine call data for a remote site, such as the date and time of the last local incoming and outgoing calls, as well as

any failed attempts to exchange messages with the site.

Obtain more detailed information about call data in remote sites using reports.

To determine call data for a remote site

1. In the Navigation Pane, click Network> Remote sites.

2. Click Search to find and select a remote site.

3. Look at the Outgoing Calls and Incoming Calls sections on the page call data information includes: Last call,

status, messages sent, messages received, and total failed calls.

4. Click Reset to reset the Total failed calls field.

5. Change the Maximum failed calls allowed field to change the maximum number of failed calls allowed.

NOTE

WHEN THE TOTAL FAILED CALLS EQUALS THE MAXIMUM FAILED CALLS ALLOWED, THE SYSTEM STOPS ATTEMPTING MESSAGE DELIVERY

UNTIL THE TOTAL FAILED CALLS IS RESET.

6. Click Save to save any changes made on this page.