Installation guide

UNIVERGE

UM8000 Message Networking 310

Exporting Directories

Before subscriber and group information can be imported by a remote site, the local site directory information must be

exported. The exported information can be transferred to the remote site using discs, tapes, a modem, or the Internet.

NOTES

EXPORTED DIRECTORY INFORMATION IS USED WITH PLUSNET SITES. THE AMIS PROTOCOL DOES NOT SUPPORT DIRECTORY INFORMATION

EXCHANGE.

MESSAGE DELIVERY TO ALL REMOTE SITES IS DISABLED DURING THE EXPORT PROCEDURE. THE MESSAGING SYSTEM CONTINUES TO TAKE

CALLS WHILE EXPORTING INFORMATION.

To export the local site directory

1. In the Navigation Pane, click Network > Remote Sites.

2. Click Search to find and select a remote site.

3. The Directory Export field displays a default file name for the directory export file. To use another name, type it in

the field. The file name uses the yyyy_mm_dd_nnnnnn format where:

4. Click Export.

A message alert appears asking if you are sure you want to export directory information

5. Click OK. A download dialog box appears.

6. On the Download file dialog box, specify a location to save the file.

NOTE

THE DIRECTORY INFORMATION IS NOT SENT TO THE REMOTE SITE. THE INFORMATION IS WRITTEN TO A .ZIP FILE IN THE SPECIFIED

LOCATION. THE FILE MUST BE MANUALLY TRANSFERRED TO THE REMOTE SITE AND IMPORTED.