Installation guide

System Configuration 31

Configuring Numeric Group and Remote Site IDs

Configure a remote access ID to use numbered groups or let subscribers send messages to remote locations. When

using a phone to leave a message, subscribers enter the ID to identify the correct numeric group or remote location.

When subscribers leave a message for another location, this number must be entered before specifying the remote

subscriber name or extension number.

To configure an ID for numeric groups and remote sites

1. In the Navigation Pane, click System > Configuration > General.

For detailed field information, see the System > Configuration > General System table.

2. Type a unique system ID in the System ID for access to groups and remote sites field.

3. Click Save.