Installation guide

System Overview 26

To configure a default passwords

1. In the Navigation Pane, click Subscribers > Account Policy.

The Security Settings page appears.

2. To require subscribers to set a security code, clear the Permit blank password check box.

3. To require a minimum number of characters in a security code, select Minimum number of characters in

password, then type the number in the text box.

4. In the Default password for each new subscriber field, type a different code. The password must be 3-9 digits

in length.

5. Click Save.

To limit the number of times a caller can enter an invalid system ID

1. In the Navigation Pane, click System > Configuration > General.

2. In the Maximum number of attempts to enter a personal ID field, set the maximum number of times a caller

can enter an invalid system ID. The default is ten.

3. In the Maximum security code/password attempts field, set the maximum number of times a subscriber can

incorrectly enter a security code before having to reenter a valid system ID. The default number is one.

4. In the Callers entering a bad ID will be rerouted to field, type the system ID a caller is transferred to when the

caller enters the maximum number of invalid IDs.

5. Click Save.