Installation guide

Subscriber Template Overview 147

Enabling Live Monitor

The live monitor feature must be licensed. It enables subscribers to listen to a message as it is being recorded in their

mailbox. The phone system and the subscriber’s extension must be configured properly to monitor messages as they

are being recorded.

Refer to “Configuring live monitor” and “Configuring the phone system integration” chapters in the Installation Guide for

instructions.

To enable live monitor

By default, live monitor is disabled for subscribers on the default subscriber template. Use the following procedure to

use live monitor.

1. In the Navigation Pane, click Subscribers > Subscriber Template > Access Options.

For detailed field information, see the Subscriber Template > Subscriber Template > Access Options table.

2. In the Administration section, select Enable Live Monitor.

3. Click Save.

4. Enable live monitor for any previously existing subscribers.