Hardware manual

Electra Elite Least Cost Routing Manual
This manual contains instructions for the service technician to program the
customer system for least cost routing.
Electra Elite Automatic Call Distribution Manual
This manual contains instructions for the service technician to program the
ACD. This manual can be used also by the ACD supervisor, at the customer
site, to become familiar with the ACD/MIS feature.
Electra Elite 48/192 Job Specifications Manual
This manual contains instructions to install and maintain the Electra Elite
48/192 system and includes job specification worksheets. Completing the
worksheets provides all system programming values and configuration
information necessary for technicians to maintain the system.
Elite ACD Plus Installation Manual
This manual provides general information about the Elite ACD Plus features,
installation procedures and feature programming. The NEC Elite ACD Plus is
an Automatic Call Distribution card that supports up to 40 agents and 12
supervisors at one time.
Electra Elite Wireless System Manual
This manual describes the system and provides hardware installation and
programming procedures for the Electra Elite Wireless Communication
System (WCS).
Electra Elite IPK/Electra Elite System Administration Terminal End-User
Manual
This manual describes the operation of the SAT End-User program for the
Electra Elite Key Telephone system. This program is a user-friendly Windows
application that allows the user to program and configure several features of
the Eletra Elite KTS from the PC environment.
Elite VoIP Gateway Card Installation Manual
This manual describes the IPT(4)/(8)-U10 ETU, an optional interface for the
Electra Elite KTS, that can combine trunk and tie line calls into Voice over
internet Protocol (VoIP) Gateway trunks.