Hardware manual

Electra Elite Issue 8
System Hardware Manual 10 - 17
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
Leave one SLI(4)/(8)-U( ) ETU, one ESI(8)-U( ) ETU, and
CPUB( )-U( ) ETU installed. Go to Flowchart A.
Problem
solved?
Problem
solved?
Problem
solved?
No Dial Tone Access on SLT
E1
Check Memory Block 7-1 for
SLI(4)/(8)-U( ) ETU
assignments.
Assignment
correct?
Assign Again.
End.
Replace SLT, and test.
Replace SLT, and test.
Both CO
Internal
Good
Go to Flowchart C3.
Go to Flowchart C3.
No CO
or internal
dial tone?
Check CO line dial tone
on a Multiline Terminal.
Bad
Repair SLT.
1. Reset SLI(4)/(8)-U( ) ETU, and test.
2. Replace SLI(4)/(8)-U( ) ETU, and test.
3. Perform Second Initialization, and test.
Problem
solved?
Done.