Hardware manual

Electra Elite Issue 8
System Hardware Manual 9 - 3
3.2 Attach a Multiline Terminal to the System
1. Plug a telephone cord into the modular jack on the bottom
side of the Multiline Terminal.
2. Lead the cord out through the cord groove as shown in
Figure 9-2 Connect an Electra Professional Multiline
Terminal to the Electra Elite 192 System.
SECTION 4
I
NSTALLING AN
A
NCILLARY DEVICE
A
DAPTER IN THE
M
ULTILINE TERMINAL
4.1 Ancillary Device Adapter Installation
The ADA(1)-W Unit or the ADA(2)-W Unit can be installed in any
Electra Professional multiline terminal in the system.
1. Unplug the line and headset cords.
2. Turn the multiline terminal upside down and place it on a dry
surface.
3. Remove the knockout shown in Figure 9-3 Removing
Knockout.
Figure 9-2 Connect an Electra Professional Multiline Terminal
to the Electra Elite 192 System