Hardware manual

Issue 8 Electra Elite
8 - 46 Installing Electra Elite IPK and D
term
Series i Equipment
5. Install the line cord.
6. Install the headset and anchor it in the cord slot as
shown in Figure 8-60 Installing and Anchoring
Headset.
7. Connect the RS-232C cable from the computer to
the connector on the CT(A)-R Unit as shown in
Figure 8-61 Connecting the RS-232C Cable to the
CT(A)-R Unit on the Multiline Terminal.
Figure 8-60 Installing and Anchoring Headset
Figure 8-61 Connecting the RS-232C Cable to the
CT(A)-R Unit on the Multiline Terminal